198003783 - 1820B57 PIPE FROM VIBRATION DAMPER TO SLAVE CYLINDER

Removing ( Refitting ) - Unscrew the brake fluid reservoir cap and fit the tool.
ToolDescriptionFunctionValidity
2000001400PlugBrake/ clutch system vacuum
1. Retract the clip and disconnect the oil supply pipe to the operating cylinder from the three-way connector.- Open the intermediate pipe retaining clip from the vibration damper to the operating cylinder.
1. Undo the connector and remove the pipe from the vibration damper to the operating cylinder.
Refitting ( Removing ) - Place the pipe from the vibration damper to the operating cylinder in position and tighten the connector.- Connect the fluid pipe to the operating cylinder, three-way connector side and secure it using the retaining clip.- Close the intermediate pipe retaining clip from the vibration damper to the operating cylinder.    Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR