199000589 - 1088C40 THERMOSTAT- R + R

Removing ( Refitting )     Op. 0010T20 ENGINE COOLANT - CHANGE - Disconnect the negative battery terminal.1. Loosen bands and disconnect sleeves (1a) and (1b) from the thermostat.2. Disconnect the degassing pipe rapid connector.3. Detach the electrical connection for the air temperature sensor.
DescriptionConnector
3Engine coolant temperature sensor/sender unit    See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT
4. Undo the bolts and remove the thermostat.- Remove the gasket.
Refitting ( Removing ) - Place the thermostat in position and secure it tightening the bolts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
ThermostatBoltM60.8 ÷ 1.01.2 8v1.4 8v
ComponentFasteningdia  Value (daNm)Validity
ThermostatBoltM60.9 ÷ 1.11.4 16v
- Attach the electrical connection for the coolant temperature sensor.- Connect the degassing pipe rapid connector.- Connect the hoses to the thermostat using the bands.- Connect the negative battery terminal.    Op. 0010T20 ENGINE COOLANT - CHANGE