199003011 - 0510C10 FUEL SYSTEM - CHECK DELIVERY PRESSURE

- Disconnect the electrical connections from the injectors.
DescriptionConnector
-Injector    See N070 INJECTOR
1. Prepare the test equipment as described in points 2, 3 and 4 below.
ToolDescriptionFunctionValidity
1860955000Pressure gaugeFuel pressure check1.2 8v1.4 8v1.4 16v
The test equipment has adapators for connection to different types of injection systems; make sure that the appropriate adapators are fitted before making the connections.
2. Open the tap.3. Close the tap.4. Close the tap.5. Position the test equipment and connect it to the fuel manifold bleed valve using the specific connector.
ToolDescriptionFunctionValidity
1870684000Quick coupling connectorFuel pressure check1.2 8v1.4 8v1.4 16v
- Reconnect the electrical connections to the injectors.- Start up the engine and check that the pressure reading on the gauge during idling corresponds to the recommended figures.
MeasurementValueValidity
Fuel supply pressure (idle speed)3.5 bar1.2 8v1.4 8v1.4 16v
- Switch off the engine.- Operate the fuel pump through the "Active Diagnosis" function of the diagnostic equipment and check that the pressure does not exceed 4 bar.- Disconnect the test equipment and the specific connector from the fuel manifold bleed valve.