199000806 - I014 BRAKE LIGHTS AND THIRD BRAKE LIGHT NOT WORKING

The side brake lights and the third brake light are activated by the Body Computer Node controlled by the brake light switch.
Test results
1CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation
Connect an Examiner tester and ensure that the following errors are not present in the Body Computer node:- error B1010;- error B1011;- error B1026;- error B1028Move on to Step 21. Presence of error B10102. Presence of error B10113. Presence of error B10264. Presence of error B10281. Replace brake light switch faulty    Op. 5550D10 BRAKE LIGHT SWITCH - R+R 2. Move on to Step 33. Move on to Step 34. Move on to Step 2
2BRAKE LIGHT OPERATION CHECK.All OKProblems encounteredOperation
Keep the diagnostic tester connected and check that the brake lights are operating correctly in active diagnosis modeMove on to Step 31. Bulbs operating2. Bulbs not operating1. Replace Body Computer    Op. 5505A32 BODY COMPUTER - R.R 2. Replace the bulb or the associated wiring
3ELECTRICAL SYSTEM CHECKAll OKProblems encounteredOperation
Check the continuity of the bulb wiring    See E2021 BRAKE LIGHTS Move on to Step 4Wiring brokenRestore correct wiring
4CONTROL SWITCH CHECKAll OKProblems encounteredOperation
Check that the brake switch is working properly    See Test 5550DA BRAKE PEDAL SWITCH OPERATION CHECKMove on to Step 5Switch brokenReplace brake light switch faulty    Op. 5550D10 BRAKE LIGHT SWITCH - R+R
5BODY COMPUTER CONNECTION CHECKAll OKProblems encounteredOperation
Check for deformed terminals or connections not present on the Body ComputerEnd of diagnosisMissing connections/pins bentRenew the correct connections