199002303 - S061 DASHBOARD CREAKING

With the vehicle moving, particularly over rough ground or during acceleration or braking, noise can be heard from the dashboard area
Test results
0PRELIMINARY CHECKSAll OKProblems encounteredOperation
Carry out a road test to try and identify the area where the creaking is coming from    See Test 70B ROAD TEST FOR NOISE RECOGNITION Move on to Step 11. Creaking noise cannot be located2. Noise coming from one of the front doors1. Move on to Step 12. Proceed as instructed    See table S062 FRONT DOORS CREAKING
1CHECK THE GLOVE COMPARTMENTAll OKProblems encounteredOperation
Check the correct fastening of the dashboard glove compartment and its flap. In particular, check for the presence of the rubber pad used to secure the compartment to the dashboardMove on to Step 21. Faulty compartment fastening2. Faulty flap fastening1. Restore the correct fastening of the compartment on the dashboard    Op. 7040A18 GLOVE COMPARTMENT IN DASHBOARD - ARRANGE 2. Restore the correct fastening of the compartment flap on the dashboard    Op. 7040A18 GLOVE COMPARTMENT IN DASHBOARD - ARRANGE
2CHECK DASHBOARD/WINDSCREEN COUPLINGAll OKProblems encounteredOperation
Check the gap between the lower area of the windscreen and the dashboard is correct: the gap must be sufficiently large for a card to be insertedMove on to Step 3Faulty dashboard fasteningRenew the felt pads behind the facia in the contact area with the windscreen
3AIR DISTRIBUTION VENT FASTENINGS CHECKAll OKProblems encounteredOperation
Check the condition of the air distribution vent fastening tabs on the dashboardMove on to Step 41. Side vent fastening faulty2. Centre vent fastening faulty1. Renew the correct fastening    Op. 5010C38 SIDE AIR VENT (ONE) LEFT OR RIGHT IN DASHBOARD - R.R. 2. Renew the correct fastening    Op. 5010C31 CENTRE AIR VENT IN DASHBOARD (ONE) LEFT OR RIGHT - R.R.
4CHECK GAUGE FASTENINGSAll OKProblems encounteredOperation
Check that the instrument panel is correctly fastened behind the steering wheel: in particular, check for the felt pads in the coupling area with the dashboardMove on to Step 5Faulty fastening of gauges behind the steering wheelRestore the correct fastening of the instrument panel    Op. 5560B10 CONTROL PANEL - R+R
5CHECK STEERING COLUMN TRIM FASTENINGAll OKProblems encounteredOperation
Check that the steering column trim is correctly fastened to the dashboard. In particular, make sure that the following are present:- insulating material around the cables;- felt pads in the mating area with the dashboard;- free movement of the steering wheel height adjustment device;- fastening of the column cover casingsMove on to Step 6Faulty fasteningRestore the correct fastening on the facia. Restore the felt pads if necessary
6CLIMATE CONTROL SYSTEM CONTROL UNIT FASTENING CHECKAll OKProblems encounteredOperation
Check that the climate control system control unit is correctly fastened to the dashboardMove on to Step 7Climate control system control fastenings faultyRenew the correct fastening for the climate control system control unit    Op. 5040D10 AIR CONDITIONER CONTROLS SUPPORT - R+R OR REPLACEo    Op. 5040D14 CONTROL UNIT WITH AUTOMATIC AIR CONDITIONING CONTROL PANEL - R.R.
7CLIMATE CONTROL SYSTEM UNIT CORRECT FASTENING CHECKAll OKProblems encounteredOperation
Remove the dashboard trim and check that the heater/air distribution assembly is correctly fastened    Op. 7040A10 DASHBOARD TRIM - R+R End of diagnosisHeater/air distribution unit fastening faultyRestore the correct fastening for the heater/air distribution unit    Op. 5040C10 AIR CONDITIONING CASING - R.R