199000121 - 5540B26 BULB (ONE) FOR SIDE LIGHT FOR ONE HEADLAMP/LIGHT CLUSTER, L/H OR R/H - R+R
Removing
(
Refitting
)
- Proceed as follows for the left headlamp side light.- Open the bonnet.1. Release anchorage (1a) from fitting (1b) of the reservoir containing the washer fluid from clip (1c).2. Withdraw fitting (2a) of the reservoir from its seat (2b).
1. Remove the press-fitted rubber cover in the arrowed direction.
1. Press the counterposed tabs (1a) and withdraw bulb holder (1b).2. Extract the bulb from the bulb holder (press fit).
- Proceed as follows for the right headlamp side light.- Open the bonnet.1. Remove the press-fitted rubber cover in the arrowed direction.
1. Press the counterposed tabs (1a) and withdraw bulb holder (1b).2. Extract the bulb from the bulb holder (press fit).
Refitting
(
Removing
)
- Check the condition of the bulb and make sure that it is clean.- Fit the bulb in the bulb holder.- Reposition the bulb holder with the bulb in its seat and do up the side tabs.- Remove the filler cap.- If removed previously, position the washer fluid reservoir fitting and do up the anchorage.- Check that the bulb is working.- Close the bonnet.
Removing
(
Refitting
)
- Proceed as follows for the left headlamp side light.- Open the bonnet.1. Release anchorage (1a) from fitting (1b) of the reservoir containing the washer fluid from clip (1c).2. Withdraw fitting (2a) of the reservoir from its seat (2b).
