199000128 - 5540D14 L/H OR R/H FOG LIGHT BULB (ONE) - R+R

Removing ( Refitting ) - Position the vehicle on the lift and raise it.1. Undo bolts (1a) and plastic nut (1b) securing front wheel arch (1c).
1. Move the wheel arch (1a) slightly and disconnect the electrical connection (1b) for the fog light (1c).
DescriptionComponent
LEFT FOG LIGHT    See F015 LEFT FOG LAMP
RIGHT FOG LIGHT    See F016 RIGHT FOG LAMP
2. Turn the foglamp cover anticlockwise, then remove.3. Disconnect the electrical connection for the bulb.4. Release the retaining spring moving it sideways.5. Extract the bulb.
If the bulb is working properly, avoid touching it with your hands. If this does happen, clean the bulb with alcohol.
Refitting ( Removing ) - Check the condition of the bulb and make sure that it is clean.
Avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.
1. Fit the bulb in its housing positioning it as illustrated in the diagram.
- Fit the retaining spring in position.- Connect the electrical connection for the bulb.- Refit the cover and turn it into position.- Connect the electrical connection for the fog light.- Position the front wheel arch and secure with the bolts and nut.- Lower the vehicle and remove it from the lift.- Check the electrical operation of the fog lamp.