199000216 - 7005R90 ELECTRIC DOOR MIRROR CABLE LOOM - R.R OR REPLACE

Removing ( Refitting )     Op. 7005R35 DOOR MIRROR REFLECTOR (ONE), LEFT OR RIGHT - R.R     Op. 7005R36 DOOR MIRROR ADJUSTMENT MOTOR (ONE), LEFT OR RIGHT - R.R     Op. 7005R37 DOOR MIRROR COVER (ONE), LEFT OR RIGHT - R.R 1. Remove the moulding (1a) using the special tool, releasing the retainers (1b) and (1c).
ToolDescriptionFunctionValidity
1878077000KnifeRetainer removal
2. Disconnect the electrical connection.
DescriptionComponent
LEFT EXTERIOR REAR VIEW MIRROR    See P060 DRIVER'S DOOR MIRROR
RIGHT EXTERIOR REAR VIEW MIRROR    See P061 RIGHT DOOR MIRROR
3. Remove the cable loom (3a) releasing the cable duct (3b).
Refitting ( Removing ) - Check that the cable loom is not damaged and that the individual conductors are correctly fastened to the connections.If necessary, carry out continuity tests.- Position the cable loom and attach the cable duct.- Connect the electrical connection.- Place the moulding in position and attach the retainers.    Op. 7005R37 DOOR MIRROR COVER (ONE), LEFT OR RIGHT - R.R     Op. 7005R36 DOOR MIRROR ADJUSTMENT MOTOR (ONE), LEFT OR RIGHT - R.R     Op. 7005R35 DOOR MIRROR REFLECTOR (ONE), LEFT OR RIGHT - R.R