199000331 - 7045B10 FRONT SEAT HEAD RESTRAINT, LEFT OR RIGHT - R.R.

Removing ( Refitting ) - If the seat is equipped with an adjustable head restraint, proceed as follows.1. Raise the head restraint until it is in the end of travel position.2. Press the retainers (2a) and (2b) simultaneously and extract the head restraint (1).
If the seat is equipped with a head restraint that cannot be adjusted, proceed as follows.    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.     Op. 7045A48 LEVER AND TRIM FOR FOLDING BACKREST - R.R.    Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R.     Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R     Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R     Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R 1. Open the zip fastener (1a) along the entire section (1b).2. Disconnect the lower two ends of the backrest cover attached to one another.3. Raise the backrest trim as far as possible.
1. Using a screwdriver, release the retainers (1a) and release the head restraint (1b) and pins (1c).
Refitting ( Removing ) - Check that the head restraint is not damaged.- For head restraints that cannot be adjusted.- Fit the head restraint in place and attach the pins to the retainers.- Position the padding on the seat frame and fit the backrest cover on the padding.- Connect the lower two ends of the backrest cover attaching them to one another.- Close the zip fastening along the entire length.    Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R     Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R     Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R     Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R.     Op. 7045A48 LEVER AND TRIM FOR FOLDING BACKREST - R.R.    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. - For adjustable head restraints.- Press the retainers and fit the head restraint.- Check that the head restraint is working.