199000720 - 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R.

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R - Unscrew the brake-clutch fluid reservoir plug and fit the tool.

Tool	Description	Function	Validity
2000001400	Plug	Brake/ clutch system vacuum

1. Unscrew fittings (1a) of pipes (1b) from the ABS control unit.

Mark the pipes before unscrewing the fittings.

2. Disconnect the electrical connection for the A.B.S. control unit.

	Description	Connector
2	ABS control unit	See M050 ABS CONTROL UNIT (REAR)

3. Unscrew the nuts securing the ABS control unit to the body.4. Move the pipes away from the ABS control unit and remove it complete with the mount. - Unscrew the nuts and remove the bracket from the ABS control unit. Refitting ( Removing ) - Fit the ABS control unit to the bracket and secure with the nuts.- Refit the ABS control unit wtih bracket in its seat and tighten the nuts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
A.B.S. hydraulic and electronic control unit mounting bracket - body side	Bolt	M8	2.2 ÷ 2.6

- Disconnect the electrical connection for the A.B.S. control unit.- Tighten the ABS control unit pipe fittings to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10	1.4 ÷ 1.8

    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R