199001645 - 1820B47 RIGID PIPE FROM MASTER CYLINDER (PUMP) TO VIBRATION DAMPER - R. R. FOR RIGHT HAND DRIVE VERSIONS

Removing ( Refitting ) 1. Undo the cap and tighten the tool on the brake-clutch fluid reservoir.

Tool	Description	Function	Validity
2000001400	Plug	Brake/ clutch system vacuum

1. Adjust the clip (1a) and detach the connector (1b) for the rigid supply pipe from the clutch pump. 1. Working on clip (1a), disconnect the rigid supply pipe (1b) from the vibration damper and remove it from the intermediate clips. Refitting ( Removing ) - Place the rigid supply pipe back in its housing and connect it to the vibration damper using the retaining clip.- Connect the connector for the rigid supply pipe to the clutch pump using the retaining clip.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR