199001652 - 3340B53 RIGID PIPE (ONE) FROM MASTER CYLINDER (PUMP) TO ABS HYDRAULIC CONTROL UNIT - R.R. FOR RIGHT HAND DRIVE VERSIONS

Removing ( Refitting ) - Position the vehicle on a lift.1. Working underneath the vehicle, remove the air conditioning system pipe from the retaining band.
1. Undo the cap and tighten the tool on the brake-clutch fluid reservoir.
ToolDescriptionFunctionValidity
2000001400PlugBrake/ clutch system vacuum
Mark the pipe to be removed on the brake pump and A.B.S.control unit side connectors.
1. Undo the connector (1a) and open the clips (1b) securing the rigid pipe (1c).
1. Undo the connector (1a) and move the rigid pipe (1b) away from the brake pump.2. Undo the connector (2a) and remove the rigid pipe (2b) from the brake pump.
Refitting ( Removing ) - Fit the rigid pipes in their seats and tighten the connectors to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Brake pipe connectorsConnectorM101.4 ÷ 1.8
- Close the rigid pipe retaining clips.- Fasten the air conditioning system pipe using the retaining band.- Remove the vehicle from the lift.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR