199001668 - 2127A70 SUPPORT FOR CONTROL LEVER FOR MANUAL GEARBOX WITH HYDRAULIC SELECTION AND HANDBRAKE - R.R.

Removing ( Refitting )     Op. 2125C02 GEAR CONTROL LEVER OUTER GAITER R R     Op. 2127A20 COVER FOR CONTROL LEVER/HANDLE FOR MANUAL GEARBOX WITH HYDRAULIC SELECTION - R.R.     Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.1. Undo the nuts securing the central exhaust pipe to the catalytic converter flange.2. Undo the bolt securing the collar to the bracket.- Disconnect the centre exhaust pipe from the flexible mounting and move it aside, securing it appropriately.
1. Undo the bolts (1a), lower the support for the gearbox manual control lever (1b) as necessary to disconnect the electrical connection (1c).
DescriptionConnector
1c-    See H037 GEAR CONTROLS
- Remove the support for the gearbox manual control lever assembly.
1. Undo the bolts (1a) and remove the gearbox manual control lever (1b) from the support (1c).
Refitting ( Removing ) - Place the gearbox manual control lever support back in its housing and secure it using the bolts.- Place the gearbox manual control lever support in position, connect the electrical connection and secure it to the bodyshell using the bolts.- Release the exhaust pipe from the provisional fastening and connect it to the catalytic converter flange and to the mounting bracket.    Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 2127A20 COVER FOR CONTROL LEVER/HANDLE FOR MANUAL GEARBOX WITH HYDRAULIC SELECTION - R.R.     Op. 2125C02 GEAR CONTROL LEVER OUTER GAITER R R