199000436 - 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE

Removing ( Refitting )     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE     Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R     Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED     Op. 1084B30 ENGINE OIL FILTER - R.R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1092B60 ALTERNATOR DRIVE BELT - R + R     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R     Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R    Op. 5510C14 IGNITION COIL/S - R.R.     Op. 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED 1. Undo the bolt (1a) and remove the engine rpm sensor (1b).2. Disconnect the electrical connection for the minimum engine oil pressure switch.

	Description	Connector
2	Insufficient engine oil pressure sensor	See K030 ENGINE OIL PRESSURE SENSOR (SWITCH)

3. Undo the bolts and remove the crankshaft oil seal front cover.- Remove the gasket. Refitting ( Removing ) - Place the crankshaft front cover in its seat complete with gasket and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Crankshaft oil seal front cover	Bolt	M6	0.8 ÷ 1.0	1.2 8v1.4 8v1.4 16v1.3 Multijet

- Connect the electrical connection for the minimum engine oil pressure switch.- Position the engine rpm sensor in its housing and secure it using the bolt.    Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET     Op. 5510C14 IGNITION COIL/S - R.R.     Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092B60 ALTERNATOR DRIVE BELT - R + R     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1084B30 ENGINE OIL FILTER - R.R     Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED     Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE