199000439 - 1020D30 FLYWHEEL SIDE OIL SEAL COVER - R.R. AND REPLACE GASKETS WITH FLYWHEEL REMOVED

Removing ( Refitting )     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE     Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION 1. Undo the fixing bolts (1a) and remove the oil cover (1b).- Remove the gasket. - With the oil cover at the bench, remove the oil seal. Refitting ( Removing ) - Lubricate the new gasket for the oil cover using oil.1. Place the oil cover in position on the engine blocke with a new gasket and secure it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Crankshaft to crankcase rear cover	Bolt	M6	0.8 ÷ 1.0	1.2 8v1.4 8v1.4 16v

2. Use the tools (2a) and (2b) and fit the new oil seal.

Tool	Description	Function	Validity
1860881000	Fitting tool	Fitting crankshaft rear oil seal	1.2 8v1.4 8v

Tool	Description	Function	Validity
1860879000	Grip	Fitting crankshaft rear oil seal	1.2 8v1.4 8v

    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE