199000449 - 1028H12 SET OF PISTONS WITH CONNECTING RODS - R.R WITH CYLINDER HEAD/S REMOVED

Removing ( Refitting ) 1. Fit engine mount crossmember (1a) with blocks (1b) and link (1c).

Tool	Description	Function	Validity
1870595000	Crossmember	Power unit mount	1.2 8v1.4 8v1.4 16v TJet1.3 Multijet

Tool	Description	Function	Validity
1870650000	Support blocks	Power unit mount	1.2 8v1.4 8v1.4 16v TJet1.3 Multijet

    Op. 0010T12 ENGINE OIL AND FILTER - REPLACE     Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R     Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED 1. Undo the bolts (1a) and remove the connecting rod cap (1b).- Repeat the operation for the remaining pistons. - Lower the lift.- Remove the pistons complete with connecting rods. Refitting ( Removing ) 1. Use the tool (1a) and fit the piston (1b) in the cylinder liner/bore. - Repeat the operation for the remaining pistons.- Position the connecting rod caps and secure them by tightening the fixing bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Connecting rod caps	Bolt	M8	1.9 ÷ 2.1 + 40° +/- 2°	1.2 8v1.4 8v1.4 16v1.3 Multijet

    Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED     Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE