199000451 - 1028H54 PISTON WITH CONNECTING ROD - DISMANTLING AT THE BENCH

Removing ( Refitting ) 1. Remove the seals (1a) from the piston using the tool (1b).
1. Fit the connecting rod-piston assembly to tool (1a), then use a hydraulic press and tool (1b) to remove pin (1c).
ToolDescriptionFunctionValidity
1860986000MountConnecting rod-piston assembly support1.2 8v1.4 8v
ToolDescriptionFunctionValidity
2000003500Extractor/ fitting toolExtracting/fitting piston gudgeon pin1.2 8v1.4 8v
Refitting ( Removing ) 1. Join the connecting rods to the pistons so that the gudgeon pin offset is facing the number stamped on the big end.
1. Fit the gudgeon pin (1a) using the fitting tool (1b) working in the vice with the connecting rod supported by the tool (1c).
ToolDescriptionFunctionValidity
2000003500Extractor/ fitting toolExtracting/fitting piston gudgeon pin1.2 8v1.4 8v
ToolDescriptionFunctionValidity
1860986000MountConnecting rod-piston assembly support1.2 8v1.4 8v