1032B40 TOOTHED DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED - Fiat - GRANDE PUNTO - eLearn

199000457 - 1032B40 TOOTHED DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED

) - Position an arm lift underneath the engine.1. Remove the threaded cap.2. Unscrew the bolt (2a) and remove the toothed driven pulley (2b), applying counter-torque using the spanner (2c) in the camshaft splining.

Refitting ( Removing

) - Position the toothed timing drive pulley in its housing and tighten the bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Toothed driven pulley	Bolt	M12	1.8 ÷ 2.2 + 55°	1.4 8v

- Tighten the threaded plug to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Cap for toothed driven pulley bolt	Plug	M27	2.5 ÷ 3.0	1.4 8v

- Remove the hydraulic jack from underneath the engine.