199000467 - 1036B10 OVERHEAD CAMSHAFT IN CYLINDER HEAD - R.R ON VEHICLE

Removing ( Refitting )
If the camshaft is replaced, run the following self-learning procedure.Start the engine without pressing the accelerator pedal with an engine temperature greater than or equal to 20 °C and with the engine idling for 10 seconds.
    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R     Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R    Op. 5510C14 IGNITION COIL/S - R.R.     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1092B60 ALTERNATOR DRIVE BELT - R + R     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET     Op. 1032B60 DRIVEN BELT PULLEY(S) - R.R.1. Undo the bolts (1a) and remove the camshaft caps (1b).2. Remove the camshaft.3. Remove the camshaft oil seal.
Refitting ( Removing ) - Refit the camshaft in its seat and fit a new oil seal.- Place the camshaft caps in their housings and secure them tightening the bolts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Camshaft capsBoltM81.8 ÷ 2.21.2 8V1.4 8v
    Op. 1032B60 DRIVEN BELT PULLEY(S) - R.R.    Op. 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092B60 ALTERNATOR DRIVE BELT - R + R     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 5510C14 IGNITION COIL/S - R.R.     Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.