1820B56 RIGID PIPE FROM VIBRATION DAMPER TO SLAVE CYLINDER - R R - Fiat - GRANDE PUNTO - eLearn - 4CarData

199000938 - 1820B56 RIGID PIPE FROM VIBRATION DAMPER TO SLAVE CYLINDER - R R

Removing ( Refitting

)

This procedure is only valid for right hand drive versions.

Op. 5530B10 BATTERY - R+R Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Lift up the retaining clip (1a) and disconnect the rigid pipe (1b) from the vibration damper.

1. Undo the connector (1a) and open the retaining clips (1b) and remove the rigid pipe (1c).

Refitting ( Removing

) - Place the rigid pipe back in its housing and secure it to the bodyshell with the retaining clips.- Connect the rigid pipe to the hose and tighten the connector.- Connect the rigid pipe to the vibration damper and secure it with the retaining clip. Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 5530B10 BATTERY - R+R Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR