199001643 - 1820B21 MASTER CYLINDER (PUMP) - R R FOR RIGHT HAND DRIVE VERSIONS

Removing ( Refitting ) 1. Undo the cap and tighten the tool on the brake-clutch fluid reservoir.
ToolDescriptionFunctionValidity
2000001400PlugBrake/ clutch system vacuum
1. Disconnect the flexible intake pipe from the clutch pump.2. Adjust the clip (2a) and detach the connector (2b) for the rigid supply pipe from the clutch pump.
1. Remove the clip (1a) and the pin (1b) connecting the clutch pump fork to the pedal.2. Undo the bolts (2a) and remove the clutch pump (2b).
Refitting ( Removing ) - Position the clutch pump in its housing and secure it tightening the bolts to the recommended torque.- Secure the clutch pump to the pedal using the pin and the retaining clip.- Connect the connector for the rigid supply pipe to the clutch pump and close the retaining clip.- Connect the flexible intake pipe to the clutch pump.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR