199001680 - 2127E50 HYDRAULIC SELECTION GEARBOX CIRCUIT PRESSURE SENSOR - R.R.

Removing ( Refitting ) - Connect the Examiner and carry out the hydraulic gear actuation circuit depressurizing procedure.

In order for the depressurizing procedure to be successful it is necessary that:- there are no errors present- the brake pedal is kept pressed.

Disconnect the electrical connection for the pump; if the ignition is turned ON the circuit operating pressure will be restored.

    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Disconnect electrical connection (1a) and remove the pressure sensor (1b).

	Description	Connector
1a	Pressure sensor on gearbox	See K096 PRESSURE SENSOR ON TRANSMISSION

Refitting ( Removing ) - Tighten the pressure sensor and connect the electrical connection.    Op. 0010T47 HYDRAULIC SYSTEM FLUID FOR GEARBOX WITH HYDRAULIC SELECTION CHECK LEVEL AND TOP UP, IF NECESSARY     Op. 0010T48 HYDRAULIC SYSTEM FOR GEARBOX WITH HYDRAULIC SELECTION - BLEED AIR     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R