199002348 - 1036C39 PHASE TRANSFORMER ON INLET CAMSHAFT IN CYLINDER HEAD - R.R.

Removing ( Refitting )

If the variable valve timing is replaced, run the following self-learning procedure.Start up the engine without pressing the accelerator pedal with an engine temperature greater than or equal to 20 °C and idle the engine for 10 seconds.

    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R     Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R    Op. 5510C14 IGNITION COIL/S - R.R.     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1092B60 ALTERNATOR DRIVE BELT - R + R     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET     Op. 1032B60 DRIVEN BELT PULLEY(S) - R.R. Refitting ( Removing )     Op. 1032B60 DRIVEN BELT PULLEY(S) - R.R.    Op. 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092B60 ALTERNATOR DRIVE BELT - R + R     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 5510C14 IGNITION COIL/S - R.R.     Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.