1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET - Fiat - GRANDE PUNTO - eLearn

199000421 - 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET

)

If the cam cover is replaced, run the following self-learning procedure.Start the engine without pressing the accelerator pedal, with engine temperature greater than or equal to 20 °C and engine idling for 10 seconds.

Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R Op. 5510C14 IGNITION COIL/S - R.R. Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.1. Unscrew the bolt and remove the earth cable (1a) and electrical connection of timing sensor (1b).

	Description	Connector
1a	Earth on engine	See C040 ENGINE EARTH

	Description	Connector
1b	Timing sensor	See K047 TIMING SENSOR

2. Disconnect the electrical connection of the variable valve timing solenoid (2a), unscrew the bolts and remove the cam cover (2b).

	Description	Connector
2a	Variable valve timing actuator	See N076 PHASE TRANSFORMER ACTUATOR

- Unscrew the bolt and remove the timing sensor.

Refitting ( Removing

) - Fit the cam cover on the cylinder head.1. Fit template 1a) on cam cover (1b).

Tool	Description	Function	Validity
2000004300	Template	Tappet cover centering	1.4 8v

2. Tighten the cam cover bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Tappet cover	Bolt	M6	0.8 ÷ 1.0	1.2 8v1.4 8v1.3 Multijet1.9 Multijet

1. Remove the template and fit the timing sensor.

- Connect the electrical connection for the variable valve timing solenoid.- Connect the electrical connection for the timing sensor and earth lead. Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R. Op. 5510C14 IGNITION COIL/S - R.R. Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R Op. 1048A10 AIR FILTER ASSEMBLY - R.R.