199000431 - 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION

Removing ( Refitting )     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE     Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R     Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.- Disconnect the exhaust pipe from the flange and from the flexible mountings, move it aside and secure it appropriately.1. Undo the bolt securing the exhaust pipe bracket to the gearbox.2. Undo the bolts (2a) and remove the flywheel guard (2b). 1. Undo the nuts (1a) and the bolts (1b).2. Remove the sealant using tool (2a) and remove the engine oil sump (2b).

Tool	Description	Function	Validity
1870718000	Blade	Cut sealant

Refitting ( Removing ) - Thoroughly clean traces of sealant from the mating surfaces between the crankcase sump and engine block.- Apply silicone sealant to the oil sump fitting surface.- Refit the oil sump in its seat and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Engine oil sump - crankcase side	Bolt	M8	2.2 ÷ 2.7	1.2 8v1.4 8v

Component	Fastening	dia	Value (daNm)	Validity
Engine oil sump - rear cover side and oil pump side	Nut	M6	0.8 ÷ 1.0	1.2 8v1.4 8v

- Refit the flywheel guard and secure it using the bolts.- Tighten the bolt securing the exhaust pipe bracket to the gearbox.- Refit in its seat and connect to the flange and to the exhaust pipe flexible mounts.    Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE