199000457 - 1032B40 TOOTHED DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED
Removing
(
Refitting
)
- Position an arm lift underneath the engine.1. Remove the threaded cap.2. Unscrew the bolt (2a) and remove the toothed driven pulley (2b), applying counter-torque using the spanner (2c) in the camshaft splining.
Refitting
(
Removing
)
- Position the toothed timing drive pulley in its housing and tighten the bolt to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Toothed driven pulley | Bolt | M12 | 1.8 ÷ 2.2 + 55° | 1.4 8v |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Cap for toothed driven pulley bolt | Plug | M27 | 2.5 ÷ 3.0 | 1.4 8v |