199000471 - 1036H14 VALVE TAPPETS - CHECK CLEARANCE

Removing ( Refitting )     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R     Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R    Op. 5510C14 IGNITION COIL/S - R.R.     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET 1. With the engine cold, use a feeler gauge to check that the valve clearance is within the specified limits with the valves closed.

Measurement	Value	Validity
Inlet valve clearance in closed position (mm)	0.3	1.2 8v1.4 8v

Measurement	Value	Validity
Exhaust valve clearance in closed position (mm)	0.4	1.2 8v1.4 8v

- Rotate the camshaft and check the clearance for all the tappets. Refitting ( Removing )     Op. 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 5510C14 IGNITION COIL/S - R.R.     Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.