199002254 - 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R
Removing
(
Refitting
)
- Position the vehicle on a lift.1. Unscrew bolt (1a), screws (1b) and (1c) and remove the bell housing bracket (1d).
Refitting
(
Removing
)
- Place the bell housing bracket in its housing and secure it tightening the screws and bolt to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Bracket joining manual gearbox/differential to engine - differential side | Bolt | M8 | 2.2 ÷ 2.7 | 1.2 8v1.4 8v |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Bracket joining manual gearbox/differential to engine - gearbox side | Bolt | M12 | 5.0 ÷ 6.0 | 1.2 8v1.4 8v |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Bracket joining manual gearbox/differential to engine - gearbox side | Bolt | M10 | 3.6 ÷ 4.4 | 1.2 8v1.4 8v |