1. Remove the protective plug and connect the bleed recovery device (pipe and reservoir) to the clutch hydraulic actuator bleed cock.2. Open the clutch hydraulic actuator bleed tap by 180 degrees.- Open the tool fluid reservoir tap slowly.- Wait for all the air in the hydraulic clutch release system to escape.- Close the bleed valve on the clutch slave cylinder and refit the protective cap in its seat.
- Remove the recovery device (pipe and reservoir)- Remove the brake-clutch bleed equipment.- Check that the cluch disengages and that the gears engage properly.- Check the fluid level in the brake-clutch reservoir is correct. Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 5530B10 BATTERY - R+R
