199002358 - 1056B51 CAM ANGLE SENSOR - R.R.

Removing ( Refitting )

If the cam angle sensor is replaced, run the following self-learning procedure.Start the engine without pressing the accelerator pedal, with engine temperature greater than or equal to 20 °C and engine idling for 10 seconds.

- Disconnect the negative battery terminal.1. Disconnect electrical connection (1a), unscrew the bolts and remove cam angle sensor (1b).

	Description	Connector
1a	Timing sensor	See K047 TIMING SENSOR

Refitting ( Removing ) - Refit the cam angle sensor in its seat, secure with the bolt and connect the electrical connection.- Connect the negative battery terminal.