199000411 - 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Removing ( Refitting )     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE 1. Disconnect the vacuum hose from the rigid intermediate pipe.2. Undo the nuts (2a) and remove the connector bracket (2b) aside. 1. Undo the bolts fixing the rigid mount to the engine.2. Remove the rigid mount. Refitting ( Removing ) - Place the rigid mount back in its housing.- Tighten the bolts securing the rigid engine mount to the engine to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit rigid support to engine block	Bolt	M10	5.7 ÷ 6.3	1.3 Multijet

- Place the connector bracket in its housing and secure it using the bolt.- Connect the vacuum hose to the rigid intermediate pipe.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE