199000605 - 1092A10 CRANKSHAFT PULLEY - R + R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 1092G10 SINGLE ENGINE BELT - R.R 1. Fit a suitable (6 mm diameter) peg via the special opening in the gearbox to be used for counter-torque.

Check that the peg is correctly inserted in the housing in the flywheel.

1. Undo the bolts (1a) and remove the crankshaft pulley (1b). Refitting ( Removing ) - Position the crankshaft pulley in its housing and secure it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Services pulley on crankshaft	Bolt	M8	2.3 ÷ 2.8

- Remove the peg from the opening in the gearbox.    Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R - Remove the vehicle from the lift.