1. Raise the key.2. Lift the red clip locking bush.3. Press clips (3a) and remove switch (3b) of pedal mount (3c).
- Remove the brake pedal switch from the pedal mount in the same way as for the clutch pedal switch.Refitting
(
Removing
)
- Place the switch in its housing, move the bush back to lock the clips, press the key fully and release to its normal operating position- Place the clutch pedal back in its housing and secure it using the pin.- Place the brake pedal back in its housing and secure it using the pin.- Place the accelerator pedal back in its housing and secure it using the bolts. Op. 3330B02 PEDAL ASSEMBLY - R.R Op. 5010C55 LOWER AIR DIFFUSER (ONE) LH OR RH - R.R (left side).