1088E10 RADIATOR COOLING FAN - R + R - Fiat - GRANDE PUNTO - eLearn

199002383 - 1088E10 RADIATOR COOLING FAN - R + R

) Op. 0010T20 ENGINE COOLANT - CHANGE Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R 1. Loosen the band and disconnect the radiator lower coolant outlet hose.2. Unscrew the coolant reservoir bolts and move it aside.

1. Disconnect the rapid connector for the radiator upper coolant inlet hose, radiator side.

1. Disconnect the electrical connection for the fan.

	Description	Connector
1	Engine fan motor	See N011 FAN MOTOR

2. Disconnect the resistor electrical connection.

	Description	Connector
2	Engine fan adjustment resistance	See O010 ENGINE FAN ADJUSTMENT RESISTANCE - 1

3. Undo the bolts (3a) securing the fan (3b) and remove it from the clips on the right side of the radiator.

Refitting ( Removing

) - Place the fan in position and secure it tightening the bolts and clips.- Connect the electrical connection for the fan.- Connect the electrical connection for the resistor.- Connect the rapid connector for the radiator upper coolant inlet hose, radiator side.- Place the coolant reservoir in its housing and secure it using the bolts.- Connect the coolant outlet pipe to the reservoir. Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 0010T20 ENGINE COOLANT - CHANGE