199000105 - 1060G28 FUEL PRESSURE SENSOR ON FUEL MANIFOLD TO INJECTORS - R.R

Removing ( Refitting )

If the fuel pressure sensor is being replaced, when the refitting is complete the following operations must be carried out using the Examiner.

    Op. 1048A10 AIR FILTER ASSEMBLY - R.R. 1. Disconnect the electrical connection for the fuel pressure sensor.

	Description	Connector
1	Fuel pressure sensor	See K083 FUEL PRESSURE SENSOR

2. Undo the fuel pressure sensor and remove it. Refitting ( Removing ) - Place the fuel pressure sensor in position and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Pressure sensor - fuel manifold side	-	-	3.0 ÷ 4.0	1.3 Multijet

- Connect the electrical connection to the fuel pressure sensor.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.