199000413 - 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Removing ( Refitting ) - Disconnect the negative battery terminal.- Position an arm lift underneath the engine.1. Disconnect the electrical connections for the injection control unit.

	Description	Connector
1	Engine management control unit	See M010 ENGINE MANAGEMENT ECU

- Open the clip and move the air conditioning system pipe.1. Undo the bolts securing the flexible block to the bodyshell.2. Undo the bolts securing the flexible block to the rigid mount.3. Remove the flexible mounting. Refitting ( Removing ) - Place the flexible block back in its housing.- Tighten the bolt fixing the flexible mounting to the rigid support to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit to rigid support flexible mounting	Bolt	M12	9.0 ÷ 11.0	1.3 Multijet1.9 Multijet

- Tighten the bolt fixing the flexible block to the body to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit flexible mounting to body	Bolt	M10	5.4 ÷ 6.6

- Place the air conditioning system pipe back in its housing.- Connect the electrical connections for the injection control unit.- Remove the arm lift from underneath the engine.- Connect the negative battery terminal.