199000938 - 1820B56 RIGID PIPE FROM VIBRATION DAMPER TO SLAVE CYLINDER - R R

Removing ( Refitting ) Proceed as described below for the left hand drive version    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1820B58 CLUTCH HYDRAULIC CIRCUIT VIBRATION DAMPER - R+R 1. Undo the connector and separate the flexible pipe (1a) from the rigid pipe (1b). Proceed as described below for the right hand drive version    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Lift up the retaining clip (1a) and disconnect the rigid pipe (1b) from the vibration damper. 1. Open the retaining clips (1a), lift up the retaining clip (1b), disconnect the flexible pipe (1c) and remove it complete with rigid pipe (1d) from the three-way connector. 1. Undo the connector and separate the flexible pipe (1a) from the rigid pipe (1b). Refitting ( Removing ) Proceed as described below for the left hand drive version- Connect the rigid pipe to the flexible pipe and tighten the connector.    Op. 1820B58 CLUTCH HYDRAULIC CIRCUIT VIBRATION DAMPER - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR Proceed as described below for the right hand drive version- Connect the rigid pipe to the flexible pipe and tighten the connector.- Place the rigid pipe and the flexible pipe in position securing them to the bodyshell using the retaining clips.- Connect the flexible pipe to the three-way connector and secure with the retaining clip.- Connect the rigid pipe to the vibration damper and secure it using the retaining clip.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR