199002537 - 1084C12 ENGINE OIL HEAT EXCHANGER, COMPLETE WITH ENGINE OIL FILLER AND FILTER - R.R.

Removing ( Refitting )     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1084C22 HEAT SHIELD ON ENGINE OIL HEAT EXCHANGER - R.R.     Op. 1084B40 ENGINE OIL DELIVERY PIPE TO TURBOCHARGER - R + R 1. Loosen the band and disconnect the lower coolant outlet hose from the radiator, engine oil heat exchanger side.

Drain the coolant into a suitable container.

- Undo the bolts fixing the engine oil heat exchanger coolant inlet pipe, heat exchanger side.1. Undo the bolts (1a) and remove the engine oil heat exchanger complete with filter and engine oil filler (1b) and gasket.

Collect the engine oil that comes out in a suitable container.

Refitting ( Removing ) - Place the engine oil heat exchanger complete with engine oil filler and filter plus gasket in its housing and secure it tightening the bolts to the recommended torque.

Ensure the gasket is not damaged and correctly positioned.

Component	Fastening	dia	Value (daNm)	Validity
Engine oil filter mounting	Bolt	M6	0.8 ÷ 1.0	1.3 Multijet

- Tighten the bolts fixing the engine oil heat exchanger coolant inlet pipe, heat exchanger side.- Connect the radiator lower coolant outlet hose, engine oil heat exchanger side and tighten the band.    Op. 1084B40 ENGINE OIL DELIVERY PIPE TO TURBOCHARGER - R + R     Op. 1084C22 HEAT SHIELD ON ENGINE OIL HEAT EXCHANGER - R.R.     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 0010T20 ENGINE COOLANT - CHANGE