199000712 - 3330C44 BRAKE FLUID MINIMUM W/L SWITCH - R + R

Removing ( Refitting ) Proceed as described below for the left hand drive version- Disconnect the negative battery terminal.    Op. 5530B10 BATTERY - R+R     Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Disconnect the electrical connection from the brake fluid minimum warning light switch.
DescriptionConnector
1Brake fluid level sensor (switch)    See K025 BRAKE FLUID LEVEL SENSOR (SWITCH)
2. Compress the spring and simultaneously remove the minimum brake fluid warning light switch from the reservoir.
Proceed as described below for the right hand drive version1. Undo the bolts fixing the injection control unit mounting bracket to the bodyshell.
1. Undo the bolt fixing the wiring duct to the brake-clutch fluid reservoir mounting bracket.2. Undo the bolt fixing the injection control unit mounting bracket to the brake-clutch fluid reservoir mounting bracket.- Move the injector control unit mounting away without disconnecting the electrical connections.
1. Disconnect the electrical connection for the brake-clutch fluid minimum level warning light switch.
DescriptionConnector
1Brake fluid level sensor (switch)    See K025 BRAKE FLUID LEVEL SENSOR (SWITCH)
2. Press the retaining clip (2a) and remove the brake-clutch fluid warning light switch (2b).
Press the clip in the area nearest the connector.
Refitting ( Removing ) Proceed as described below for the left hand drive version- Place the brake fluid minimum level warning light switch in its housing and connect the connection.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 5530B10 BATTERY - R+R - Connect the negative battery terminal. Proceed as described below for the right hand drive version- Place the minimum brake fluid warning light switch back in its housing until the retaining clip is fully fitted.- Connect the electrical connection from the brake fluid minimum warning light switch.- Refit the injection control unit mounting in its seat and secure it to the bodyshell using the bolts.- Place the wiring duct in position and secure it to the brake-clutch fluid mounting bracket using the bolt.