199000717 - 3330D30 VACUUM UNIT - R+R
Removing
(
Refitting
)
Op. 5530B10 BATTERY - R+R Op. 1048A10 AIR FILTER ASSEMBLY - R.R. 1. Loosen the band and disconnect the vacuum intake pipe from the vacuum pump.2. Undo the bolt securing the pipe mounting bracket.3. Undo the bolts (3a) and remove the vacuum unit (3b).- Remove the gasket.
Refitting
(
Removing
)
- Place the vacuum unit complete with gasket in positin and secure it tightening the bolts to the recommended torque. | Follow the order shown in the figure for each tightening sequence.The tightening to 2.0 daNm is performed in two stages: a pretightening to 0.5 daNm followed by an additional tightening of 1.8 - 2.2 daNm. |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Vacuum pump | Bolt | M8 | 1.8 ÷ 2.2 | 1.3 Multijet |
