199002511 - 1032A12 TIMING SYSTEM DRIVE CHAIN - R.R

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R     Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 1020B10 COVER FOR TIMING SYSTEM WITH CHAIN DRIVE - R.R AND REPLACE GASKET1. Undo the timing driven pulley fixing bolt.
Mark the installation position of the exhaust side camshaft toothed drive pulley and the toothed drive pulley; if the pulleys are replaced, fit them with the writing facing outwards.
2. Remove the timing chain (2a) together with the camshaft driven pulley (2b) and the toothed drive pulley (2c).
- Use a suitable tool (e.g. vice) to set the chain tensioner and hold it fully back with a retaining pin. Refitting ( Removing ) - Refit the timing chain together with the timing driven pulley and the toothed drive pulley.- Tighten the timing driven pulley bolt to the specified torque.
ComponentFasteningdia  Value (daNm)Validity
Toothed driven pulleyBoltM1213.5 ÷ 16.51.3 Multijet
- Remove the pin from the mobile tensioner and check that the mobile tensioner piston is in contact with the pad.    Op. 1020B10 COVER FOR TIMING SYSTEM WITH CHAIN DRIVE - R.R AND REPLACE GASKET    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE - Remove the vehicle from the lift.