199003165 - P0683 Preheating glow plugs signal

The error is detected if the feedback constantly remains above the Low level state both during the ON command and the OFF command for the heater plugs control unit (with detail open circuit) or if during the OFF command for the heater plugs control unit the feedback remains in the High state (with detail short circuit to earth)

		Test results
1	HEATER PLUGS CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check there are no faults in the heater plugs supply circuit by performing the    See Test 5520CA CHECK GLOW PLUG OPERATION	End of diagnosis	-	-