199003184 - P2299 Accelerator brake feasibility

This error code does not indicate a fault. It is a signal to the user to limit torque in any case. The following diagnosis should be carried out only as a precautionThe test is performed if the rpm is higher than 1200 rpm, top speed greater than 5 km/h, accelerator pedal and clutch with no errors, accelerator pedal depressed.This error is detected if the brake pedal is pressed for longer than 983 msecs.

		Test results
1	CHECK UNDER NORMAL DRIVING CONDITIONS	All OK	Problems encountered	Operation
	This fault code indicates an invalid operating condition:- Brake and accelerator pedals pressed simultaneouslyRoad test the vehicle under correct conditions and check that the errror does not occur again	End of diagnosis	The error does not occur again	Check that the accelerator pedal is working properly, carrying out the    See Test 1068AC ACCELERATOR PEDAL CHECKS