199003186 - U0405 Cruise control module signal

This invovles a check on the correct communication between the CCM and NBC

		Test results
1	CHECK ON OPERATION OF CRUISE LEVER ON STALK UNIT	All OK	Problems encountered	Operation
	Check that the Cruise control lever is working properly, as described in the    See Test 5580AF CHECK CRUISE CONTROL COMMANDS	Move on to Step 2	-	-
2	NORMAL OPERATING CONDITIONS	All OK	Problems encountered	Operation
	If the check on the operation of the lever did not produce a negative result, this fault code indicates an improper operating condition:- SET+ button pressed for too longDelete the error, inform the customer that the system is operating normally and explain how to operate it correctly	End of diagnosis	-	-