199003189 - U1706 CAN network (NCM - NFR)

The diagnostic test checks that there are no messages with the NFR node (with detail NFR node missing) or the message frame from the NFR node (with detail NFR node faulty)

		Test results
1	ENGINE CONTROL UNIT CONNECTION CHECK	All OK	Problems encountered	Operation
	Check that the CAN connections between the engine management control unit and the ABS control unit are not faulty. In particular, that there are no open circuit or short circuit problems    See E1050 CAN CONNECTION LINES	Move on to Step 1	There are faulty connections	Restore or, if necessary, replace the wiring
2	ERROR CHECK	All OK	Problems encountered	Operation
	Check whether the following error is present on the diagnostic equipment	Move on to Step 2	The error is intermittent	Proceed with deleting the error and explain to the customer that nothing has happened to the vehicle
3	ABS CONTROL UNIT REPLACEMENT	All OK	Problems encountered	Operation
	Replace the ABS control unit    Op. 3340A20 ABS ELECTRONIC CONTROL UNIT - R+R	End of diagnosis	-	-