199000336 - 7045D21 FRONT SEAT CUSHION COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED

Removing ( Refitting )     Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R.     Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R     Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R     Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R 1. Disconnect front retainer (1a) of the cushion trim from the seat frame profile (1b).2. Release side retainers (2a) by undoing tabs (2b).3. Release the rear part (3a) of the cushion trim from retainers (3b).4. Remove the cushion with padding.
- If necessary, separate the cushion trim from the padding as indicated below.1. Prise up the trim and release from the padding border.2. Use cutters to cut all the upper cushion trim retainers.3. Separate the cushion cover (3a) from the padding (3b).
Refitting ( Removing ) - Check that the cushion cover is not damaged.- If removed, position the cushion cover padding and crimp the retainers using special pliers.
Mould the cover on the upholstery during the various refitting stages.
- Prise up the trim around the edge of the padding.- Position the cushion trim with padding on the seat frame.- Connect the rear part of the cushion trim to the retainers.- Do up the side retainers.- Connect front retainer of the cushion trim to the seat frame profile.    Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R     Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R     Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R     Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R.