199000421 - 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET

Removing ( Refitting )     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1064B50 TURBOCHARGER VANE POSITION CONTROL ACTUATOR SOLENOID VALVE INLET PIPE - R.R. 1. Loosen the colllars and disconnect the oil vapour pipes from the cam cover.2. Undo the bolts (2a) and remove the cam cover (2b). Refitting ( Removing ) - Place the cam cover in position and secure it by tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Tappet cover	Bolt	M6	0.8 ÷ 1.0	1.2 8v1.4 8v1.3 Multijet1.9 Multijet

- Connect the oil vapour pipes to the cam cover and tighten the bands.    Op. 1064B50 TURBOCHARGER VANE POSITION CONTROL ACTUATOR SOLENOID VALVE INLET PIPE - R.R.     Op. 1016A10 SOUND-PROOFING COVER - R.R