199000484 - 1040B56 REAR FUEL RETURN PIPE - R.R.
Removing
(
Refitting
)
- Position the vehicle on a lift.- Fold the rear seat cushion over.1. Using the tool (1a) release and remove the access cover to the fuel pump assembly (1b).
| Tool | Description | Function | Validity |
|---|
| 2000015800 | Counter-torque | Locking driven pulley | 1.4 16v TJet |
- Raise the vehicle.1. Disconnect the rear fuel return pipe rapid connector.
1. Undo the bolts and remove the guard.
1. Disconnect the rapid connector and remove the rear fuel return pipe from the clips.
1. Position a hydraulic lift underneath the fuel tank.2. Loosen the bolts (2a) fixing the tank mounting bracket, right side, and lower the tank (2b).- Remove the rear fuel return pipe.
Refitting
(
Removing
)
- Place the rear fuel return pipe back in its housing.- Place the fuel tank in position and tighten the bolts securing the tank mounting bracket to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|
| Fuel tank | Bolt | M8 | 3.2 ÷ 3.9 | |
- Remove the hydraulic lift positioned underneath the fuel tank.- Fasten the rear fuel return pipe using the clips and connect the rapid connector.- Place the protection back in its housing and secure it using the bolts.- Lower the vehicle.- Connect the rear fuel return pipe rapid connector.- Place the access cover to the fuel pump assembly in position.- Place the rear seat cushion in position.- Remove the vehicle from the lift.
