199000500 - 1048B25 INTERMEDIATE RIGID PIPE BETWEEN HEAT EXCHANGER AND THROTTLE BODY - R R

Removing ( Refitting ) - Position the vehicle on the lift.    Op. 7210E10 R.R. FRONT BUMPER 1. Undo the bolt fixing the rigid pipe to the wing join assembly seal.2. Loosen the bands and remove the intermediate rigid pipe between the heat exchanger and the throttle casing. Refitting ( Removing ) - Place the intermediate rigid pipe in position between the heat exchanger and the throttle casing and secure it using the bands.- Tighten the bolt fixing the rigid pipe to the wing join assembly seal.    Op. 7210E10 R.R. FRONT BUMPER - Remove the vehicle from the lift.