199000515 - 1060F30 SINGLE FUEL MANIFOLD PIPE - R.R.

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R    Op. 1060G50 THROTTLE BODY - R.R     Op. 1080C24 E.G.R. SYSTEM SOLENOID - R + R     Op. 1060F36 PIPES (ALL) FROM FUEL MANIFOLD TO INJECTOR - R.R.     Op. 1060F20 PIPE FROM PRESSURE PUMP TO FUEL MANIFOLD - R.R. 1. Disconnect the electrical connection for the fuel pressure sensor.

	Description	Connector
1	Fuel pressure sensor	See K083 FUEL PRESSURE SENSOR

1. Loosen the band and disconnect the fuel return pipe, single fuel manifold pipe side.2. Undo the bolts (2a) and move the bracket (2b) aside.3. Undo the nuts (3a) and remove the single fuel manifold assembly pipe (3b). - Position the single fuel manifold pipe in a vice fitted with protective jaws.- Undo the fuel pressure sensor and remove it. Refitting ( Removing ) - Place the fuel pressure sensor in its housing on the single fuel manifold pipe and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Fuel pressure sensor - fuel manifold side	-	M	6.5 ÷ 7.5	1.9 Multijet

- Remove the single fuel manifold pipe from the vice.- Place the single fuel manifold pipe in its housing and secure it by tightening the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Common rail	Nut	M8	2.3 ÷ 2.8	1.9 Multijet

- Fit the bracket in its housing and secure it using the bolts.- Connect the fuel return pipe, single fuel manifold pipe side and tighten the band.- Connect the electrical connection to the fuel pressure sensor.    Op. 1060F20 PIPE FROM PRESSURE PUMP TO FUEL MANIFOLD - R.R.     Op. 1060F36 PIPES (ALL) FROM FUEL MANIFOLD TO INJECTOR - R.R.     Op. 1080C24 E.G.R. SYSTEM SOLENOID - R + R     Op. 1060G50 THROTTLE BODY - R.R     Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R